UE900 เห็นในเวบเฮดไฟ เค้าว่า จะมีบางล๊อตที่มีปัญหา ตรงขั้วต่อ จนต้องเรียกคืนสินค้ากลับมาแก้ไข จนสินค้าขาดตลาด ไปช่วงนึง เค้าว่า ถ้าผมจำไม่ผิดนะ คือ 1ใน3 ตัว ลองอ่านข้อความนี้นะครับ
"คิดว่าน่าจะเป็น tinyman392 ซึ่งเขียนรีวิวในตัวที่เป็น
preproduction demo พบว่ามีปัญหาที่ตรงสายต่อกับคอนเนคเตอร์ของตัวหูฬัง จนต้องส่งซ่อมและหยุดการวิจารณ์
ไปช่วงหนึ่ง ช่วงนั้นทางบริษัทก็เรียกหูฬังทั้งหมดกลับพร้อมที่จะแก้ไข แต่ไม่ทราบว่าได้แก้ไขสมบูรณ์หรือยัง จึงมีช่วงหนึ่ง
ที่มีการดีเลย์ในการส่งของ น่าจะลองเขียนไปถามเขาที่ head-fi ดูก็ได้ครับ
เท่าที่ทราบ ประมาณ หนึ่งในสาม ของ preproduction model มีปัญหา หวังว่าของเราคงไม่ใช่ล็อตนั้น
http://www.head-fi.org/t/624973/ulti...ion-thread/450 ตอนที่เริ่มมีปัญหาเขาเพียงเขียนว่ารีวิวต้องเลื่อนออกไปเพราะมาเหตุแทรกซ้อน
I will be writing a review, these are burned in, but won't be for long (the unit I will be using won't be burned in on Friday) (you can figure out what that means XD). The review has been put on a short delay due to complications
แล้วก็มีเขียนโต้ตอบกลับไปมา
They don't work anymore, so he's getting a replacement. That's a big red flag for me, unless he accidentally destroyed them
They still work... I am sending them back though. Not the first IEM I've debt back. I made a post in the M100 thread about first runs/pre-production models having a bigger tendency to have problems (that are fixed). Kind of related. I fixed this problem a bit (I personally can't induce it anymore by force), they do want to look at it. All ill say. They work though
I was one that had to do it. I did get it fixed, but UE wants to still look at it so they can, I assume (I know, I know), fix it for future productions of the 900s. UE is aware of this problem. These unforeseen problems are normally seen more from headphones that come first off the line
average_joe ก็พบปัญหาแบบเดียวกัน
Mine were replaced as well. I did notice the sound cut out a bit if I didn't have the memory wire over my ears, but when it was in place they were fine. UE just wanted to replace them anyways
หลังจาก tinyman_392 ได้รับตัวใหม่แล้วเขาบอกว่าขณะนี้ไม่มีปัญหา แต่คาดว่าพบได้ประมาณหนึ่งในสาม
All that said, my current model does not have this problem, it seems to have been remedied. I've stated this dozens of times, just because a pre-production unit has problems doesn't mean the final will. This is a classic case of this statement. My EtyKids 3 had problems (never got replaced) with the headphone jack bending (literally, it bent to about a 15-degree angle). I'm 99.99999999... percent sure the EtyKids 3 production models don't have this problem. I've dealt with various pre-production models, about 2/3s of them turn out fine. The other 1/3 ends up having some slight problem behind it.
UE900 เห็นในเวบเฮดไฟ เค้าว่า จะมีบางล๊อตที่มีปัญหา ตรงขั้วต่อ จนต้องเรียกคืนสินค้ากลับมาแก้ไข จนสินค้าขาดตลาด ไปช่วงนึง เค้าว่า ถ้าผมจำไม่ผิดนะ คือ 1ใน3 ตัว ลองอ่านข้อความนี้นะครับ
"คิดว่าน่าจะเป็น tinyman392 ซึ่งเขียนรีวิวในตัวที่เป็น
preproduction demo พบว่ามีปัญหาที่ตรงสายต่อกับคอนเนคเตอร์ของตัวหูฬัง จนต้องส่งซ่อมและหยุดการวิจารณ์
ไปช่วงหนึ่ง ช่วงนั้นทางบริษัทก็เรียกหูฬังทั้งหมดกลับพร้อมที่จะแก้ไข แต่ไม่ทราบว่าได้แก้ไขสมบูรณ์หรือยัง จึงมีช่วงหนึ่ง
ที่มีการดีเลย์ในการส่งของ น่าจะลองเขียนไปถามเขาที่ head-fi ดูก็ได้ครับ
เท่าที่ทราบ ประมาณ หนึ่งในสาม ของ preproduction model มีปัญหา หวังว่าของเราคงไม่ใช่ล็อตนั้น
http://www.head-fi.org/t/624973/ulti...ion-thread/450 ตอนที่เริ่มมีปัญหาเขาเพียงเขียนว่ารีวิวต้องเลื่อนออกไปเพราะมาเหตุแทรกซ้อน
I will be writing a review, these are burned in, but won't be for long (the unit I will be using won't be burned in on Friday) (you can figure out what that means XD). The review has been put on a short delay due to complications
แล้วก็มีเขียนโต้ตอบกลับไปมา
They don't work anymore, so he's getting a replacement. That's a big red flag for me, unless he accidentally destroyed them
They still work... I am sending them back though. Not the first IEM I've debt back. I made a post in the M100 thread about first runs/pre-production models having a bigger tendency to have problems (that are fixed). Kind of related. I fixed this problem a bit (I personally can't induce it anymore by force), they do want to look at it. All ill say. They work though
I was one that had to do it. I did get it fixed, but UE wants to still look at it so they can, I assume (I know, I know), fix it for future productions of the 900s. UE is aware of this problem. These unforeseen problems are normally seen more from headphones that come first off the line
average_joe ก็พบปัญหาแบบเดียวกัน
Mine were replaced as well. I did notice the sound cut out a bit if I didn't have the memory wire over my ears, but when it was in place they were fine. UE just wanted to replace them anyways
หลังจาก tinyman_392 ได้รับตัวใหม่แล้วเขาบอกว่าขณะนี้ไม่มีปัญหา แต่คาดว่าพบได้ประมาณหนึ่งในสาม
All that said, my current model does not have this problem, it seems to have been remedied. I've stated this dozens of times, just because a pre-production unit has problems doesn't mean the final will. This is a classic case of this statement. My EtyKids 3 had problems (never got replaced) with the headphone jack bending (literally, it bent to about a 15-degree angle). I'm 99.99999999... percent sure the EtyKids 3 production models don't have this problem. I've dealt with various pre-production models, about 2/3s of them turn out fine. The other 1/3 ends up having some slight problem behind it.