ไปอ่านเจอมา แต่เป็นภาษาอังกฤษ ลองดูครับ Restoration of Firmware Data 1 Make a USB connection between the gigabeat and the PC. 2 Start Explorer on the PC. 3 Open the folder in which the gigabeat room is installed. The folder in which the gigabeat room is installed can be opened by clicking “Start” → “All Programs” → “TOSHIBA gigabeat room 2.0” → “gigabeat room 2.0 Program Folder”. Usually, the folder will be found in C:\Program Files\TOSHIBA\gigabeat room 2.0. 4 To the gigabeat root, copy a folder named “GBSYSTEM” located in the folder that was opened in Step 3. 5 Use “Safely Remove Hardware” and disconnect the gigabeat. 6 When the gigabeat window has gone off, start the gigabeat
ไปอ่านเจอมา แต่เป็นภาษาอังกฤษ ลองดูครับ Restoration of Firmware Data 1 Make a USB connection between the gigabeat and the PC. 2 Start Explorer on the PC. 3 Open the folder in which the gigabeat room is installed. The folder in which the gigabeat room is installed can be opened by clicking “Start” → “All Programs” → “TOSHIBA gigabeat room 2.0” → “gigabeat room 2.0 Program Folder”. Usually, the folder will be found in C:\Program Files\TOSHIBA\gigabeat room 2.0. 4 To the gigabeat root, copy a folder named “GBSYSTEM” located in the folder that was opened in Step 3. 5 Use “Safely Remove Hardware” and disconnect the gigabeat. 6 When the gigabeat window has gone off, start the gigabeat